Back to top
Mantyss
Zynq™ UltraScale+™ Development Board for Desktop or Synopsys® HAPS
The Fidus Mantyss-DP-32G is the desktop version of Mantyss, and the Mantyss-32G is the Synopsys HAPS solution.
Both versions integrate an AMD® Zynq™ UltraScale+™ with multiple Arm® processors, 32Gbps transceivers, and a collection of other IO peripherals. The HAPS solution also features direct Synopsys HAPS solution interfacing.
Additional interfaces include DDR4, GigE, FMC+, an SD expansion port, a configurable clocking subsystem, and other PS and PL connections.
Select the Mantyss that’s right for you
Mantyss Desktop Version (Mantyss-DP-32G)
- Standalone, desktop development board applications
- Software and FPGA designers
- Jump starting project development
Mantyss-DP-32G Datasheet
Download
Mantyss Synopsys HAPS Version (Mantyss-32G)
- Synopsys HAPS application
- ASIC prototyping
- Complex IP development
Mantyss-32G Datasheet
DownloadMantyss features
- AMD® Zynq™ UltraScale+™ ZU19EG MPSoC
A powerful Zynq™ UltraScale+™ ZU19EG MPSoC is completely available for use in your prototype. The Zynq™ US+ ZU19EG features:- 1,143k System Logic Cells in the PL
- Quad core Arm Cortex-A53 processor with dual core Cortex-R5 real-time processors and a Mali-400 MP2 GPU in the PS
- 12 x 32/64/128b AXI Ports as the PS to PL Interface
- -3 speed grade, enabling 32Gbps operation
- Board Controller
Independent board controller handles the board management tasks; Zynq™ UltraScale+™ is completely available for user prototyping. Controller handles:- FMC interface control (e.g. EEPROM, VADJ)
- I2C interfacing
- DAC control for HT3 Vref flexibility
- Thermal management
- High Speed Interfaces
High speed Samtec® FireFlyTM Electrical/Optical connectors:- Two 4-lane x 32Gbps (max)
- Two 4-lane x 16Gbps (max)
FMC+ (VITA 57.4 compatible) connector:
- Support for HSPC FMC+
- Eight 32Gbps (max)
- Sixteen 16Gbps (max)
- LA[00:33], HA[00:08]
- VADJ support, 1.0 to 1.8V
- MPSoC Processing System (PS) interfaces
- DDR4, 16GB x72 SODIMM @ 1866MT/s
- Boot source and configuration support (Dual QSPI, MicroSD, JTAG)
- UART-over-USB serial port
- Switches and LEDs
- MPSoC Programmable Logic (PL) interfaces
- Multiple 32Gbps and 16Gbps transceivers to FMC+ and FireFly interfaces
- Peripheral Module (PMOD)
- SD expansion port
- Switches and LEDs
- Clocking Subsystem
- Onboard multi-output clock generator
- Jitter attenuator
- MMCX reference clock input
- MMCX connectors, general purpose
- LVDS, differential clock input
- Single-ended, clock input/output
- IO and Debug
- GigE, USB3.0, SD expansion
- Pushbutton / LED connection
- AMD JTAG Port (2×7, 0.100” header)
- Arm JTAG Port (2×10, 0.100” header)
- Arm Trace Port (MICTOR-38)
- Direct Connection to the Synopsys HAPS-70 / HAPS-80 Prototyping Solutions
Six HapsTrak 3 connectors that connect directly onto your Synopsys HAPS system. - Thinking of Prototyping an ARM Processor on JUNO?
Mantyss-32G has advantages over using a JUNO development board:- Direct connect to HAPS – no interface board, no cables, no external cards, and over 300 connections to HAPS via the HapsTrak3 connectors.
- Increased reliability – no dangling cables, less components to connect, and a more compact, integrated solution
- More flexibility – access the PL fabric; create custom I/O options via the FMC+
- Cost effective – higher functionality at a lower cost
-
ASIC Prototyping (Synopsys HAPS version only)
Connecting directly into the HapsTrak 3 connectors on your HAPS system, the Mantyss-32G provides flexibility and horsepower for prototyping your ASIC.
-
IP Development
The flexibility of the I/O configurations and the large PL fabric make the Mantyss-32G ideal for developing your own specific IP.
-
Software Development
The Quad core Arm Cortex-A53 processor, with dual core Cortex-R5 real-time processors and Mali-400 MP2 GPU, are inherent in the Zynq™ ZU19EG, giving you the ability to prototype ASICs with Arm processors.
-
Experimentation
With the variety of configurations available in the MPSoC and the flexibility of the FMC+ and Firefly connectors, the Mantyss-32G allows you to experiment with different designs.
- Desktop version:
- Integrates a quad-core Arm Cortex®-A53-based sub-system into the Synopsys HAPS prototyping environment
- Easy operation to enable desktop software and FPGA development
- Offers convenience and flexibility with the support of common interfaces and debugging ports
- Accelerates bring up with available example designs
- Synopsys HAPS version:
- Integrates a quad-core Arm Cortex®-A53-based sub-system into the Synopsys HAPS prototyping environment
- Provides HAPS access to numerous high-speed links at rates up to 32Gbps
- Connects directly to the Synopsys HAPS system with interoperability verified by Synopsys
- Offers convenience and flexibility with the support of common interfaces and debugging ports
- Accelerates bring up with available example designs
- In the box:
- Mantyss-32G Circuit Card Assembly (Synopsys HAPS) OR Mantyss-DP-32G Circuit Card Assembly µSD Memory Card (Desktop)
- (Desktop version only): Desktop Adapter, ATX Style Output
- Cables
- Ethernet Cable, RJ45, M/M, Cat5e, 6’ (2m)
- USB Cable, Type A to MicroB Super Speed, 6’ (2m)
- USB Cable, Type A to MicroB, 6’ (2m)
- Optional accessories:
- FMC+ Loopback Cards, available from Samtec
- FMC+ (HSPC) Loopback FMC (PN: REF-197618-01)
- FMC+ (HSPC) Loopback FMC w/ Micro Twinax FireFly QSFP28 (PN: REF-194194-01)
- FireFly electrical peripherals, available from Samtec
- Micro twin-ax loopback cable (PN: HDR-190945-01-ECUE)
- Crossed micro twin-ax cable (PN: ECUE-08-030-T2-FF-B4-1)
- Micro twin-ax to QSFP28 (PN: HDR-193805-01-ECUE)
- FireFly optical peripherals, contact Samtec
Take advantage of an AMD Premier Partner
As an AMD Alliance Program Premier Partner and HAPS Connect Member, Fidus is uniquely positioned to provide the expertise in product design and support for prototyping that pushes the limits.
